7 Best Anti-Fog Inserts for Waterproof Camera Housings in 2026

If you’ve ever faced foggy lens issues during underwater or cold weather shoots, you know how frustrating it can be. Anti-fog inserts are your best solution—they absorb moisture, prevent condensation, and keep your footage crystal clear. With options like reusable silica gel packs or specially coated pads, the choices are growing. But which ones truly perform under pressure? Let’s explore the top seven inserts designed for 2026’s toughest conditions—you might find your new troubleshooting secret.

FiTSTILL Anti Fog Inserts for GoPro Cameras

Are you looking for an easy way to stop your GoPro lens from fogging up? FiTSTILL Anti Fog Inserts might be just what you need. These inserts are made from silica gel tied to strong paper, so they can soak up water and keep your lens clear. They work well in cold, humid, or underwater places. They fit many GoPro models, from Hero 3+ to Hero 13. You can even cut them to fit your camera housing perfectly.

The best part is, you can reuse them. Just bake the inserts in an oven at 300°F to dry them out. No special tricks needed. They are lightweight, affordable, and help you get clear footage no matter where you shoot.

Who should try these? Anyone who loves outdoor adventures, underwater fun, or making videos. If you want clear shots every time, these inserts can help.

Advantages:

• They can be used again and again. Just bake to recharge.
• They fit many GoPro models and can be cut to fit your camera.
• They stop fog so your videos stay clear in bad weather or underwater.

Things to keep in mind:

• You may need to cut and place them just right to fit your camera case.
• Baking needs to be done at the right temperature, which might take some effort.
• They work best when placed correctly and in the right conditions.

If you want a simple, reusable way to keep your GoPro lens fog-free, FiTSTILL Anti Fog Inserts could be the answer. They help you film clear videos, no matter how cold or humid it gets.

60pcs Anti-Fog Inserts for Action Cameras

If you like taking pictures or videos underwater or in cold, humid places, the 60-piece anti-fog insert kit is a good choice. These reusable inserts work with many action cameras, like GoPro Hero models 3 to 13, Xiaoyi, SJCam, Insta360 Go, DJI Osmo Action, and other waterproof cases. They are made from silica gel in a paper-like material. The gel absorbs water, which stops your camera lens from fogging up.

Just put one insert on each side of your camera. When they get wet or foggy, you can dry them out by baking at 300°F for five minutes. After that, they are ready to use again.

Best for: People who enjoy outdoor activities and underwater adventures. They want to keep their camera clear when in cold, wet, or humid places.

Pros:

• Reusable. You can clean them by baking and use them many times. This saves money.
• Fit many popular action cameras and waterproof cases.
• Made from good quality silica gel and paper, so they soak up water well.

Cons:

• You need an oven or oven-like device to dry the inserts. That can be hard or not convenient for some users.
• You have to place them correctly on each side of the camera for best results. This can be tricky in tight spots.
• They may not work as well if it is very humid or cold for a long time.

This kit helps you take clear pictures even in tough conditions. It’s simple to use, reuse, and keeps your camera fog-free so you can focus on capturing your adventures.

Underwater Anti-Fog Inserts for Dive Cameras (30pcs)

Worried about foggy cameras underwater? Fogging can ruin your shots, especially in cold or humid water. The Underwater Anti-Fog Inserts (30 pcs) help you get clear footage. They fit inside waterproof dive cases and soak up moisture from temperature changes. Each piece lasts for about five uses. When it gets soaked, you can dry it in an oven at 300°F for two minutes to reset it. It’s easy and quick. These inserts work with many popular action cameras like GoPro, DJI Osmo, Insta360, AKASO, and SJCAM. They’re an affordable way to keep your footage clear on every dive.

These inserts are great for underwater photographers and action camera fans. They help you avoid foggy lenses in cold, humid, or hot water.

Here’s what’s good about them:

• You can reuse each insert about five times, saving money.
• They fit many top camera brands and waterproof cases.
• You can reset them easily in the oven, so they’ll last longer.

Here are a few things to know:

• Each insert can be used a limited number of times, so you might need replacements if you shoot a lot.
• You need an oven to dry them and reset—this might not be quick for everyone.
• They are small, only 25 mm x 12 mm, so you might need to customize to fit your case.

60pcs Anti-Fog Inserts for Action Camera Cases

The 60pcs Anti-Fog Inserts are a useful accessory for action camera cases. These inserts help stop fog inside your waterproof cameras. Fog can happen when it’s cold, humid, or underwater. These inserts work with many popular cameras like GoPro, Xiaoyi, SJCAM, Insta 360, and DJI Osmo.

You can easily use them by placing one on each side of your camera or at key points. They prevent foggy lenses, so your videos stay clear. The inserts are made of silica gel and are reusable. You can dry them out in the oven to reactivate their fog-fighting ability. This makes them a good value for long-term use.

These inserts are especially helpful for water sports or cold outdoor adventures. They keep your camera lenses free of fog, so your footage stays sharp and clear.

Why choose these inserts?

• They are reusable. Just bake them to use again.
• They fit many camera models.
• They help stop fog inside your case, even in cold or wet conditions.

Some things to note:

• You may need to place the inserts carefully to get the best fog protection.
• They can add a little size to your camera case.
• If the environment is very humid or hot, their power to prevent fog may lessen over time.

In all, these anti-fog inserts are a simple, cost-effective way to keep your action camera lenses clear. They are easy to use, reuse, and can make your outdoor adventures better by helping you get clear videos every time.

CamKix Anti-Fog Inserts for Hero Cameras (20 Pack)

The CamKix Anti-Fog Inserts are a handy tool for your Hero camera. These small pads help stop your lens from fogging up when it’s humid or cold. They are made from cellulose fiber silica gel and come in a pack of 20. That means you have enough to use over and over again for a long time.

To use, just place one insert on each side of your Hero camera’s waterproof housing, or wherever fogging happens. When they get soaked, you can refresh them by baking at 300°F for five minutes. It’s simple and keeps your camera clear during outdoor fun or cold weather.

These inserts work with all Hero camera models and other moisture-prone devices. They are reusable, helping you save money over time. Just remember, you need an oven to refresh them.

Good for: outdoor lovers and videographers who record in humid or cold areas and want a reliable way to keep their lens fog-free.

Pros:

• Reusable after baking.
• Fits all Hero camera models.
• Comes in a 20-pack for many uses and savings.

Cons:

• You need an oven to refresh them.
• You should check where to put them for each camera model.
• Not made for very extreme weather for a long time.

The CamKix Anti-Fog Inserts make it easier to take clear videos and photos outside, even in tricky weather. They are simple, cheap, and a good tool to keep your camera working well.

DGZZI 36PCS Camera Lens Anti-Fog Dehumidifier Inserts

If you take photos or videos underwater or in humid places, keeping your camera lens fog-free is важливо. The DGZZI 36PCS Camera Lens Anti-Fog Dehumidifier Inserts can help you do that. This set has 36 reusable desiccant strips made from silica gel and cellulose fibers. They absorb moisture inside your camera case, so your lens stays clear. These inserts work with many action cameras, from models 2 to 13, and other waterproof systems. Just put them in the right spot, and they start working right away. You don’t need any complicated tools. You can reuse them by baking at 300°F to remove the moisture. This makes them a cheap, eco-friendly choice for long-term fog prevention.

Who Should Use This:

Photographers and videographers who often shoot underwater or in humid places and want to prevent their camera lens from fogging up.

Advantages:

• Reusable and eco-friendly, saving money
• Works with many camera types and waterproof gear
• Easy to use, just bake to recharge

Disadvantages:

• You need to bake them at 300°F to recharge, which can be a bit of a bother
• Only absorb moisture, not for other camera repairs
• You need to place them carefully inside your camera case

If you want clear photos and videos without fog, these inserts can be a simple and effective tool.

PCTC 24 Anti-Fog Inserts for Underwater Cases

Are your underwater camera lenses fogging up during dives or water sports? The PCTC 24 Anti-Fog Inserts can help. These are small, reusable strips that absorb moisture. They stop fog from forming so you can take clear pictures underwater.

The strips work with many waterproof cases, like GoPro and DJI Osmo Action. You can use each strip about five times. When they get damp, just put them in the oven at 300°F for five minutes. They’ll dry out and be ready to use again.

They come in a pack of four vacuum-sealed pouches. This gives you plenty of strips for many trips. You won’t worry about fog ruining your shots.

Who should use these?

• Divers
• Snorkelers
• Water sports lovers who want clear photos

Good things about the inserts:

• Reusable and save you money
• Fit many waterproof camera cases
• Easy to recharge by baking, which is good for the environment

Things to remember:

• Need to reactivate regularly
• Last about five uses before needing a new strip
• Small size means keep track of them so you don’t lose any

If you want clear, fog-free photos underwater, these inserts can be your quick and easy solution. Keep your camera clear and capture every moment with ease!

Factors to Consider When Choosing Anti-Fog Inserts for Waterproof Camera Housings

When choosing anti-fog inserts, you’ll want to weigh whether they fit your specific camera housing, since a tight squeeze can cause more fog instead of preventing it. Reusability and how easy they are to maintain matter, especially if you plan on using them repeatedly during long trips—let’s face it, nobody enjoys constantly replacing or drying them out. Also, keep in mind environmental factors like humidity and temperature extremes, as some inserts perform better in certain conditions, much like choosing the right wetsuit for chilly waters.

Compatibility With Devices

Choosing the right anti-fog insert is not just about picking any foam or gel pack. It’s about making sure it fits your camera housing well. You want an insert that sits snugly without blocking your lens or buttons. Nothing is worse than covering your zoom or controls by mistake. Check the size and shape carefully. Some inserts are made for specific camera models or brands. Using the right one ensures a good fit and works properly. Think about where you will use it. If you go underwater or in cold weather, pick inserts that are safe for those conditions. They should not cause damage or rust inside your housing. Always look at the manufacturer’s advice. Make sure the insert matches your camera’s make and model. This helps you avoid surprises and keeps your gear fog-free on any adventure.

Reusability and Maintenance

Have you ever wondered if your anti-fog insert can keep working with your adventures? Reusable inserts can be refreshed by baking them at about 300°F for five minutes. This process helps them soak up moisture again and work like new. Regularly reactivating the inserts keeps them in good shape so they don’t fog up during your important dives or shoots.

The durability of these inserts depends on the materials used, like silica gel or cellulose fibers. Some last for many uses, while others may wear out faster. It is important to check the inserts regularly. Look for signs of wear or damage. Over time, they may not work as well as before.

To keep your inserts working well, bake them as needed and inspect them often. If they start to degrade, it’s better to replace them. Taking care of your inserts saves you money and helps the environment. When you maintain them well, your anti-fog inserts will be reliable for many adventures.

Moisture Absorption Effect

A big part of choosing the right anti-fog insert is how well it can soak up moisture. Fogging happens when warm, humid air touches a cooler surface inside your waterproof case. To stop this, look for inserts made from materials like silica gel mixed with paper or fiber. These materials can soak up moisture and keep your lens clear. The better the material, the longer your lens stays fog-free. Some inserts can be reused; you can bake them at 300°F to dry them out and make them work again. This makes them cheaper and good for the environment. The size and placement of the insert also matter. A properly sized insert spreads out the moisture absorption evenly, stopping fog on all parts of the lens. High-quality moisture absorption is especially helpful in cold, damp places or underwater. It keeps your camera clear so you can capture every moment without fog.

Size and Fit Flexibility

The size and fit of anti-fog inserts matter a lot. They have to match your camera housing well. You want inserts that are easy to cut or adjust. This helps them fit snugly, with no gaps. Gaps can let in moisture and make fog happen. Flexible inserts are better because they bend and shape to different camera parts. Some inserts come in different sizes or can be cut to fit your camera perfectly. Choose options you can trim without losing their moisture-absorbing power. Quick to put in and take out is also helpful. You need to change or clean them fast, especially during long shoots. Flexible and easy-to-use inserts keep your camera dry. They help you capture every shot without worry.

Environmental Conditions Suitability

Choosing the right anti-fog insert is more than just picking the right size. You should think about the weather and environment where you’ll be using it.

If you’re going somewhere cold, pick an insert that can soak up moisture well. Cold air makes fogginess more likely, especially when warm air hits a cold surface. A good insert will help stop that fog from forming.

If you plan to use your equipment underwater, make sure the insert can handle being in water a long time. It needs to resist pressure and won’t break down easily.

For places where the temperature changes a lot or it gets hot, choose an insert that keeps moisture steady. It should not dry out too fast or get overly wet.

Humidity is another factor. In humid places, you might need to recharge or replace your insert more often. Look for inserts that are easy to recharge to save time.

Picking an insert that matches where you shoot keeps your footage clear. It also saves you from dealing with fog and fuss.

FAQs

How Long Do Anti-Fog Inserts Typically Last Before Needing Replacement?

Anti-fog inserts usually last between 6 to 12 months, depending on usage and environmental conditions. You should replace them when fogging recurs or the insert no longer effectively prevents moisture buildup inside your waterproof housing.

Are Anti-Fog Inserts Reusable or Single-Use?

Anti-fog inserts are usually single-use, but some can be reused if properly cleaned and dried without damaging the coating. You should follow manufacturer instructions to guarantee your lens stays fog-free and maintains clarity.

Can Anti-Fog Inserts Be Used in All Waterproof Camera Housings?

Yes, you can use anti-fog inserts in most waterproof camera housings, but check your housing’s specifications first. Confirm the inserts fit properly and are compatible to effectively prevent fogging during underwater photography or filming adventures.

Do Different Water Temperatures Affect the Performance of Anti-Fog Inserts?

Yes, different water temperatures can affect anti-fog inserts’ performance. As temperatures fluctuate, moisture may condense more easily, making the inserts less effective. Regular checks and using appropriate inserts help maintain clear visibility in varying conditions.

Are Anti-Fog Inserts Safe for All Camera Lens Coatings?

Anti-fog inserts are generally safe for most camera lens coatings, but you should check your lens manufacturer’s guidelines first. Always test the insert in a small area to prevent potential damage and verify compatibility.

Last update on 2026-02-19 / Affiliate links / Images from Amazon Product Advertising API.   Some of the links on this website are affiliate links, which means that at no additional cost to you, I earn a commission if you click through and make a purchase. I only recommend products and services that I believe will add value to my readers. Thank you for your support!